Plate feeder

Basic information:
Application and Usage: Special for Cement Plants
Transport packaging: Sea freight
Automatic Level: Based on customer needs
Origin: China
Customized service: Customizable

Product Introduction

1. Heavy duty plate feeder
Heavy duty plate feeder is one of the bulk conveying machinery. Due to its advanced design, sophisticated configuration, and high safety factor, it is widely used in industries such as metallurgy, mining, and cement plants, and enjoys a good reputation.
Compared with other forms of feeders, heavy-duty plate feeders have the following advantages:
1. The particle size of the conveyed material is larger. The diameter of the largest block can reach 1.5 meters.
2. Can withstand greater warehouse pressure. The height of the material bin of the heavy-duty plate feeder can reach ten meters.
3. Can withstand significant unloading impacts.
4. The failure rate is extremely low. Can be used in harsh environments such as high temperature and high humidity.
It is precisely because heavy-duty plate feeders have the above advantages that many enterprises choose cost-effective heavy-duty plate feeders.

Main technical features of heavy-duty plate feeder:
The heavy-duty plate feeder produced by Shenyang Metallurgical Heavy Equipment Co., Ltd. belongs to the OK heavy-duty plate feeder series, and its original technology comes from the German O&K company. After introduction, digestion, and further innovation, its characteristics are as follows: (1) The surface plate material of the chain plate is 16Mn, with a thickness of 20-25mm, pressed into a circular arc structure. The circular arc chain plates cooperate with each other to prevent material leakage during transportation. Chain plates are welded structural components with a high composite thickness, thus possessing a high flexural modulus. Circular arc chain plates are divided into two structures: single arc and double arc, with similar performance. Customers can choose one according to their requirements. (2) Adopting a thousand ton forging engineering machinery chain (known as a tank chain). High strength, long service life, and no need for lubrication during operation. (3) The chain plate is supported by multiple sets of supporting wheels, with uniform force and small deformation. In addition, the supporting wheels are equipped with bearings, which reduces the resistance to equipment operation. (4) The whole machine runs smoothly without the need for anchor bolts. Simply embed some steel plates on the foundation, adjust the position of the equipment, and spot weld the machine base onto the embedded steel plates. (5) Adopting variable frequency motor speed regulation to ensure different production needs and easy operation.

2. Medium sized plate feeder
Medium sized plate feeder is one of the bulk conveying equipment, suitable for: 1. In principle, the equipment does not bear warehouse pressure; 2. Feed particle size<400mm; 3. Transport capacity: 100-300/h; 4. Cannot withstand large impact loads.

3、 SGF series rod vibrating feeder
The SGF series bar feeder produced by our company adopts a double eccentric shaft vibrator and is a linear reciprocating vibrating feeder; The feeding box is designed with blind plates and adjustable spacing bars, suitable for uniformly and continuously feeding coarse and medium crushers, and can perform coarse screening of materials, effectively exerting the effect of the crusher. This series of feeders is designed with not only a bar screen surface, but also two and three bar screen surfaces arranged in a stepped manner, effectively improving the flow rate of materials.

This series of feeders has a sturdy structure, is resistant to impact and wear, and is the preferred choice for feeding and screening equipment in industries such as metallurgy, mining, construction stone materials, water conservancy and hydropower.